Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Fenders

$14.99
A quick and easy clip-on fender designed to work with the Trek Blendr Saddle Bag and Blendr saddle accessory mounts. The Blendr Fendr clips onto rear saddle mounts in seconds to prevent water and road kick-up from getting you dirty. Quick and easy installation and removal keep you ready to ride no matter the weather. Plus, you can easily mount a rear light to keep you seen. Details: - Connects to the Blendr Saddle Bag mount and Blendr Saddle Accessory mount - Lightweight plastic keeps your backside dry with almost no weight penalty - Integrated light mount makes it easy to quickly add a fender and rear light - Fits into a back jersey pocket or easily into a bag - Compatible with all wheel and tire sizes for road, gravel, and commuter bikes
$62.95
The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) - Weight: 192 grams (Front); 245 grams (Rear)
$68.99
The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.
$51.99
S-BOARD This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included. S-BLADE The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted. - Weight: 206g - Wheel size: 650B – 28-inch - Tire width: 30 – 38mm - Length front fender: 390mm - Length rear fender: 465mm
$37.99
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible
$21.00
Don't let the weather get in the way of adventure. The RockShox branded ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts make for easy installation - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all ZEB models
$25.00
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
$8.33 $16.00 48% Off
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
$13.00 - $15.00
Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.
$13.99
- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes
$18.99
- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - Fat Face: you guessed it, extra wide for Fatbike applications
$19.99
The innovative design of the Full Face Fender provides maximum front-end protection, from a flexible fender, at a fraction of the weight of a bolt-on guard; a great option for riders that want the protection without the bulk.
$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$67.99
Ride in any weather The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount. Product details - Fully assembled fenders that install in minutes - Integrated rear Blendr light mount for use with Bontrager Flare lights - No-cut struts allow quick strut adjustment for proper tire clearance - Double-back strut on rear fender adds support and stability - Made of lightweight yet super-durable polycarbonate - Stainless steel hardware resists rust - Four sizes available to accommodate most bike and tire configurations
$62.99
A fender that is ready when you are On some rides you want a fender. This Universal Fender is designed for quick and easy installation on road, mountain, gravel, or city bikes so that riding with a fender on any bike can be a game-time decision. The versatile attachment clamp securely mounts tp most seatposts, and the front and rear set are designed to work with tire widths from 700x23 all the way up to 27.5/29 x 2.8. Product details - Front and rear fender set fits tire widths from 700x23 to 27.5/29x2.8 - Versatile fender offers simple and effective protection from the elements - Universal attachment clamp designed to fit most seatposts - Quick and easy installation or removal
$9.99
This simple, creatively designed rear fender clicks into most saddle rails to help keep your backside dry when the conditions take a turn for the sloppy. Small enough to store it flat in your hydration pack so you've always got it with you. Attaches in seconds with a fold and a tug. - Built from number 5 recycleable polypropylene - 1.2mm thickness - Tool free installation
$27.99
A simple yet effective alloy adapter that facilitates the mounting of traditional fenders to bicycles equipped with disc brakes. CONSTRUCTION • Lightweight aluminum MOUNTING SYSTEM • Mount to eyelets ADDED BENEFIT • A quick, easy and relatively inexpensive solution to make fenders fit • Sold as a pair
$14.99
Easy-to-install front fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube •100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket • Hardware included • Weight: 99 grams / 3.5 ounces
$82.00
These fenders feature a classic, fluted profile and are highly polished. They're 63mm wide, designed for 700c wheels, and work with tires up to 55mm wide - the sweet spot for touring and city bikes. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Rear fender is crimped just above the chainstay mount to allow use of a front derailleur - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Watch this video and read the instructions to make sure your frame and fork has the correct mounts and hardware needed. If you need additional hardware, check out this page.
$89.00
These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.
$82.00
These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.
$83.99
Genuine replacement parts. No one wants that wet stripe on their back. Details: - Keep yourself and your gear clean and dry with a stylish fender. - Accessorize your ride. Keep yourself dry. - Original equipment replacement fenders for Trek Crossrip+ bikes - Includes all necessary hardware and mounting stays - Made for Trek Crossrip+, but may fit other models - Alloy fenders are neutral black
$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams
$57.95
Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$12.80 - $21.00 $16.00 - $21.00 On Sale
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$21.00
Gravel away in rain, show, sleet or shine. The new RockShox premium short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at 3-bolt mounts and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts ensures secure attachment - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all Rudy XPLR models
$49.99
Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders! Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus, the hardware is pre-installed for hassle-free mounting.
Page 1 of 2 Next page