Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Bontrager Transmitr Remote
$39.99 $49.99 20% Off
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Bontrager Quick Connect Light Brackets
$4.99
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
No Image
$4.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
NiteRider Taillight Seat Stay Mount
$4.99
Taillight Seat Stay Mount
NiteRider Adjustable Angle Tail Light Strap Mount
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb
Light & Motion Nip Fender Mount
$29.99
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
Lezyne Inifite Light Power Pack
$79.99
Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.
Lezyne Aluminum Helmet Mount (XL)
$19.99
Lezyne's Aluminum Helmet Mount is a durable accessory for Lezyne Mini XL, Power XL, Super XL, Deca, and Mega Drive lights. It has a stamped and machined aluminum base plate, a compression ring, a Composite Matrix spherical pivot, cradle and a Velcro strap which attaches the mount to the helmet. The spherical pivot allows the user to adjust the position of the light in all directions.
Bontrager Blendr Road Ion Light Mount
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Adjustable Transmitr Remote Mount
$21.99
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote. The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm. - CNC alloy design provides light and stable mount - Allows for infinite angle adjustment - Compatible with 31.8mm - 22.2mm bars - For use with Transmitr Wireless Remote
MSW Tigermoth Headlight Bracket
$6.00
The tool-free bracket allows for a wide variety of mounting options for MSW's TigerMoth headlight.
Topeak DP Mount
$22.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Minoura SGS-400-OS Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Trek Speed Concept Seatpost Reflector/Flare Mount
$2.99
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Bontrager Flare Round Mounting Kit
$2.99
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Light & Motion Vis 360 Spare Front Mount
$9.99
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Bontrager Blendr MTB Ion Light Mount
$19.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes
Bontrager Light Bracket - SyncV2
$6.99
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
Planet Bike Fork Mount Bike Headlight Bracket
$9.99
The bolt-on headlight bracket mounts to your fork crown and provides a unique mounting option that centers a headlight just above the front wheel. It comes with a platform that is specifically designed to work with most Planet Bike lights. This platform can be removed quickly to create a 26.2mm diameter universal mount that accommodates most clamp and stretch strap mounting systems. - Planet Bike specific platform works with most Planet Bike headlights - Converts to a 26.2mm universal mount to fit most headlight mounting systems - Bracket bolts through brake mount on fork crown (60mm bolt, washer, and nut included) - Compatible with all Blaze, Beamer, Spok, Amigo and Spot headlights - Weight: 72 grams
Portland Design Works Tail Light Rack Bracket
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Light & Motion Vya Taillight Mount
$12.99
Vya redefines bike safety with smart, advanced features and an ultra-compact design. Extra seat post mounts allow Vya to be switched between bikes in seconds – perfect for families and multiple bike owners. This versatile mount can be used with the horizontal position of the Vya Pro Taillight or the vertically mounted Vya. Features - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Vya Pro Taillight mounts in a horizontal orientation; flip mount down for the standard vertical style of the Vya taillight - Compatible with Vya Pro Taillight and standard Vya Taillight
NiteRider Micro USB Cable
$6.99
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
NiteRider Pro Series Angled Multi-Position Helmet Mount
$19.99
Helmet mount for all systems that use the slider mounting clip System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
NiteRider Lumina Stick-On Mount
$14.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Mount it to your favorite downhill/MX style helmet, or explore the versatility of your Lumina headlight by mounting it onto an industrial hard hat. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Light & Motion Imjin and Nip GoPro Mount
$9.99
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.
Bontrager Town Stormshell Light Strip
$9.99
Key features: - Replacement InnerGlo LED light strips for select Bontrager Town clothing - Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants - Sold individually
Bontrager Glo/Ember Replacement Strap
$3.99
Product details - Replacement mounting strap for Bontrager Glo and Ember lights - Silicone strap allows for quick installation and removal of light - Fits 22.2 – 31.8mm handlebars, seatposts, and much more
Paul Component Engineering Gino Light Mount
$24.00
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on - Made in USA
Minoura SGS-400-STD Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Paul Component Engineering Stem Cap Light Mount
$52.50
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Page 1 of 2 Next page