Parts & Accessories

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy. Also great for light mounts, a saddlebag stabilizer, or anything else you problem solving people tend to dream up. Unless you’re thinking about towing a jet ski with it. Let’s be reasonable. Tech Details - Available in 31.8 mm and 34.9 mm diameters - Alloy clamp - Stainless steel bolt - Threaded to accept standard M5 bolts

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.

Easy on, easy off storage Genuine Bontrager replacement parts for your Trunk, Pannier, Quick Cleat and Handlebar Bracket Interchange bag systems. Product details - Designed to allow Bontrager Interchange Handlebar Baskets to fit 31.8mm bars - Includes a pair of 31.8mm clamps

Genuine replacement parts for your Interchange bag system. - The perfect accessory for when you have multiple bikes or just need a replacement. - Interchange bracket for Quick Cleat - Rugged and lightweight plastic construction - Easy on, easy off storage

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

Genuine replacement parts Assemble your cargo rack properly with genuine replacement parts. Genuine parts assure proper rack-to-bike connection. - Mounts under the fender - Compatible with 27.5"bikes, 38.1mm fenders

Genuine replacement parts Assemble your cargo rack properly with genuine replacement parts. Genuine Backrack parts assure proper rack-to-bike connection. - Straight rack stay type - Mounting hardware not included - 300mm Straight

For your most precious cargo Fetch+ 4's generously sized cargo box has room for a child seat in addition to the two reclining chairs that come with the bike. Use this adapter for Britax Römer car seats. Easily mount a Britax Römer child seat to your Fetch+ 4 with this convenient adapter. - Mounts to the front of the cargo box with the child seat facing the rider - Maximum combined weight (child seat + child) must not exceed 18kg (39 lbs.) - Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.) - Adapter for Maxi-Cosi, Cybex, and Nuna child seats available separately - Includes all installation hardware

Replacement floormat for your cargo bike.

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Topeak Elementa tool/tube strap provides a minimalist, convenient way to carry your essentials. Individual straps hold tools, Co2 tubes and levers securely. The Elementa Strap can be attached to seat rails, top or down tubes, or anywhere else on the frame. - Attach to saddle rails, seatpost, or downtube with hook and loop fastener - Anti-slip and scratch-free fabric protects your bike

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.

Extend the life of your Dummy bags with this replaceable wear patch.

Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Surly Front Rack Hardware

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

All the hardware for the lower portion of your Surly rear rack. Stainless steel.

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

The Mounting Set Toptube-Bag is not only included as standard with the Toptube-Bag but is also suitable for retrofitting the Fuel-Pack and other bags. One of the two rails is mounted directly on the bicycle, and the other on the bag you want to attach. By simply clicking in and out, you can use the bag flexibly. If there are no threaded eyelets available or you want to position the Mounting Set in a frame location where threaded eyelets are generally not present, there's no problem either - screwless mounting of the Mounting Set is also possible with the rubberized straps.

The name of the game is finding instead of searching. The Packing Cubes save you a lot of time and frustration when it comes to packing for your bike tour. The Cubes offer an ideally organized space for your clothing, tools, toiletries, and other gear. The system was specially designed for those mission-critical little things that often slip down into the depths of your panniers or otherwise defy your earnest search efforts. The inserts also help you to keep clean and soiled things separate. The three inserts (two 6-liter units and one 5-liter unit) can be perfectly stacked in ORTLIEB Back-Rollers, Velo-Shoppers, and Bike-Packers. The durable, lightweight nylon material was specially developed to ensure a long service life. All of the Cubes are outfitted with a practical 2-way zipper to ensure easy access to their contents. Outfitted with top handles, the inserts are easy to remove from your panniers. Each Cube has additional inside and outside mesh pockets for stowing those very small objects you would like to have within reach. Given their modular design, the bags can also be used individually when you're out on short trips. FEATURES: - Each unit in the modular system can also be used individually - Volume of organizers: top and middle bag: each 6 L, lower bag: 5 L - Suitable as an insert for all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers

The Protective Cap Handlebar-Pack QR protects your handlebars from pressure or abrasion damage and also makes it possible to securely mount the pack on carbon handlebars. Simple press the caps onto the two contact surfaces of the mounting set and you can fasten the mounting set or the Handlebar-Pack QR as usual.

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts). - 2 QL2.1 mounting hooks (18 mm) and adjustable handle

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

Replacement wire cord for your Handlebar Mounting Set. If the mounting wire for your handlebar adapter is defective, you can find the right spare part here. Contents - 1x wire cord with a length of 105 cm in black

Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers

For 11 and 16.5-liter Seat-Packs. You can use these support straps to give your Seat-Pack additional security and fixation on the bike. The straps additionally support the bag and prevent the bag from sinking when the load is distributed unfavourably. CONTENT: 1x support strap

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

For all models with the QL1 or QL2 system. Missing or defective screws or nuts? Get this screw-and-nut set to conveniently replace any defective or missing screws. - 12 screws - 12 plastic nuts

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin, Axle Pack is thru-axle mounted, making it impossible to slip or spin. Axle Pack is designed to be mounted to Old Man Mountain Thru Axle Fit Kits. With 3-pack mounts on the uprights you can carry bottles, fuel, stuff sacks, dry bags, bolt-on bags, and more. With four mounting points you can also choose to run your gear higher or lower depending on your needs. - Provides 3-pack mounts on any thru-axle fork - Axle Pack is rated to 10kg per pair - Four mounting points you can also choose to run your gear higher or lower depending on your needs

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

Assemble your cargo rack properly with genuine replacement parts. Details: - Original equipment specifications - For use with adjustable Electra MIK rear rack - Includes all mounting hardware

Electra's Wicker Basket Bracket Kit offers additional support to keep your Electra Wicker Basket (sold separately) securely in place, which allows you to carry even heavier items, such as books and groceries. The steel bracket attaches directly to your bike via the headset and the basket simply bolts to the bracket. You even get 2 brackets, one for standard 1-inch, and one for oversize 1 1/8-inch headsets.

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Genuine Bontrager BackRack parts ensure proper rack-to-bike connection. Details: - Parts and accessories for past and present BackRacks - Pre-2009 BackRacks use stamped steel struts - Post-2009 use tubular alloy struts - Cargo net is made of stretch webbing and attaches to any BackRack via nylon hooks - S-bend mono stay attachment provides additional mounting options for BackRack 1 and 2 - BackRack 2009 parts kit also works with BackRack Lightweight

When it's time to refresh your trusty rack, Trek Genuine Replacement Parts have you covered. Details: - For use with any style BackRack L or S - Easy to install - Use as-is for size Small BackRack models - Shorten by cutting at lines to fit Large BackRack models

Bontrager's Cargo Net keeps your gear lashed to your bike rack perfectly. The stretch webbing attaches with four hooks.