Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

$119.99
In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing
$119.00
Magura mt thirty disc brake and lever - front or rear hydraulic post mount black - Carbotecture radial master - Flip-flop, easy bleed design - Carbotecture lever-blade and handlebar clamp - 4-piston forged monobloc caliper - Adjustable reach - Adjustable banjo fitting
$117.00
Caliper only - does not include lever or hose. - Includes steel-backed organic pads
$116.80 $146.00 20% Off
- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.
$116.80 $146.00 20% Off
- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.
$113.00
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight
$113.00
Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose
$111.73
- Complete caliper replacement for Magura systems (no caliper pistons or seals available, must replace caliper). Includes brake pads - 74mm post-mount replacement calipers: if replacing IS-51mm caliper, please use separate adapter for refitment to original application
$110.00
Caliper only - does not include lever or hose. 18mm front or rear. Includes steel-backed organic pads - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT
$109.99
The RRL SR transcends the ages by offering a race quality lever without an integrated shifter. The classic styling trademarked by heroes of decades past make this a stylish lever for single speeds, fixed gear or custom applications. Th ergonomically shaped lever is drilled to enhance beauty while reducing weight. Hoods are flat and textured for enhanced grip. A built-in push button quick release system provides cable slack for quick wheel removal or additional tire clearance when conditions get muddy. SPECIFICATIONS - RRL SR - Available with gum or black hoods. - Pull ratio compatible with Spyre and road/cyclocross rim brakes - Sold as a set (left and right)
$109.60 $137.00 20% Off
- Simple, robust, powerful brake for riders who prefer to work with Mineral oil. - The lever is designed with proven lever technologies and features easy adjustment access and superior ergonomic comfort. - The caliper is based on the Code downhill brake and utilizes the same pads. - Post-mount. - Designed for use with Maxima Mineral Oil only.
$108.00
Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.
$78.16 - $105.38
- Optimum Heat dissipation - Reliable performance from Cyclecross to Downhill - High durability, even in the toughest conditions - UCI approved for road competition - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design
$104.99
The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$102.78
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.
$99.99
Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel
$98.07
- Exceptional heat management - Rounded edge - UCI approved for road competition - Disc Diameter: 220mm - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design
$97.99
The Shimano Ultegra BR-R8100 series caliper brakes offer a clear contact feeling while balancing rigidity, weight, and stopping power. With clearance for 28mm tires, the design is still sleek. They are available in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Maximum tire size is 28C - Sleek and integrated low-profile caliper design - 51mm reach
$97.84
Magura MT eSTOP disc brake calipers - MagnetiXchange pistons for easy brake pad replacement - Rotatable tube connection - Includes brake pads
$96.00
Magura service kits come in a variety of packages to fit your needs.
$95.71
Magura service kits come in a variety of packages to fit your needs.
$95.00
This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 204 g
$94.99
Shimano SLX BR-M7120 hydraulic disc brake calipers offer powerful braking performance in a 4-piston design that's optimized for tough enduro trails. - High power braking instills greater downhill confidence and control - Banjo type connection and inside hose routing - Quick and easy assembly
$94.57
Replacement lever blades for Magura disc brakes
$92.00
- Replacement caliper for Force eTap AXS
$92.00
Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.
$90.91
Magura sleeve nut - for ebike use pack of 10 - Small parts used to install hydraulic hose for Magura disc brakes.
$89.37
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.
$89.00
- Entry level to the MAGURA MT world with all of the high-tech features of German engineering skill such as lightweight Carbotecture components and the improved MAGURA disctube for safe stopping on tour and in the city - suitable for mounting left or right
$81.99 - $87.99
The pinnacle in mountain bike braking, SHIMANO XTR RT-MT900 disc brake rotors deliver superb stopping power for the most aggressive riding. The ICE TECHNOLOGIES FREEZA rotors dissipate heat to maintain braking performance on long downhill stretches. SHIMANO's CENTER LOCK mounting system makes installing and removing rotors quick and easy thanks to the spine mount and lock ring design. High-performance and consistent brake performance - Stable and versatile brake performance in the most demanding conditions New ICE TECHNOLOGIES FREEZA construction for boosting heat dissipation - Surface temperature cooled by -20°C (vs RT99, 203 mm) Rotor size - 160 mm, 180 mm, 203 mm
$86.00
- Two-piece rotor design with forged aluminum carrier - Double disc ground stainless steel rub ring - Countersunk rivets and disc screw mount points - Rounded edge shape - Mount Type: 6-Bolt
$85.99
- Shimano's flagship disc brake rotor, now available in ISO 6-Bolt mounting version - Features ICE TECHNOLOGIES FREEZA, a proprietary fabrication technique consisting of a 3-layer aluminum and stainless steel structure and special high heat dissipating treatment allowing for superior cooling and performance - Reduced power fading ensuring consistent high performance even on long downhill stretches - Helps increasing brake pads life and reducing noise
$85.47
- Optimized for Race Pads - Optimum heat dissipation - High durability - Wear indicators - Rounded edge - UCI approved - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Steel - Disc Technology: 2-piece design
$77.99 - $84.99
Shimano BR-RS305 Mechanical Road Disc Brake Caliper - Cable actuated - Single Flat-mount caliper - For use with Drop-Bar or Flat-Bar road levers - L02A Resin Pads - Rotor not included - IceTech pad compatible caliper - Includes fixing bolts for 25mm thick mount - Brake Caliper Type: Flat Mount - Brake Lever Actuation: Short Pull Super SLR - Rotor Included: No - Pad Compound: Resin
$84.00
The Magura MDR-P is a disc rotor for performance-oriented riders and tough tasks ranging from downhill and ebikes to heavy cargo bikes. It features Dovetail Interlink technology, a patented interlocking of the outer and inner rings. This provides additional support for the inner ring if the outer ring expands due to heat. In contrast to floating discs, the torque is transmitted to the dovetail-shaped toothing over its entire surface instead of just the rivets, increasing the rigidity of the brake disc and the degree of heat dissipation under continuous load. The MDR-P is the most powerful brake disc in the Magura portfolio, yet it still offers riders low weight and reduced vibration. - Perfect for demanding applications such as ebike or downhill riding - Two-piece design offers the highest level of heat dissipation and high torque transfer - Wear optimized ring design - Prepared for tone wheel or magnet
$84.00
- Special patented interlocking of the outer and inner rings (Dovetail Interlink Technology) giving optimum braking performance even under heavy loads - In addition, maximum heat resistance and stability - E-Bike optimized - 6 steel mounting screws included
$61.60 - $84.00 $77.00 - $84.00 Up to 20% Off
SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.
$83.99
Shimano Ultegra R8010 direct mount seat stay rear break caliper. - Direct mount brake - Direct brake mounts connect directly to the frame to reduce redundant parts and increase overall braking performance - Sleek design - Narrower gap between arms - Wider clearance with larger tire sizes - Compatible with wider 28C tire size - Model Number: BR-R8010-RS - Series: Ultegra - Brake Type: Direct mount type - Average Weight: 172 grams
$82.99
The Shimano Ultegra BR-R8100 series caliper brakes offer a clear contact feeling while balancing rigidity, weight, and stopping power. With clearance for 28mm tires, the design is still sleek. They are available in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Maximum tire size is 28C - 51mm reach
$82.99
The Shimano Ultegra BR-R8100 series caliper brakes offer a clear contact feeling while balancing rigidity, weight, and stopping power. With clearance for 28mm tires, the design is still sleek. They are available in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Maximum tire size is 28C - 51mm reach
$81.47
- Exceptional heat management - Rounded edge - UCI approved for road competition
$81.00
Fit for modern times. The updated SRAM Force brakeset pairs mechanical rim braking with our wireless Force eTap AXS group. The dual pivot design also accounts for wider road tires without compromising braking power. - Dual pivot design increases braking power and enhances progressive feel - Wider clearance for modern tires and wheelsets (up to 28c) - Updated finish to match SRAM Force eTap AXS - Includes SwissStop pads: Platinum Flash Pro pad (carbon rims) or BHP pad (aluminum rims) - Pad type: Cartridge - Reach: Standard
$59.99 - $79.99
Jagwire's Pro LR2 rotors are made to improve the performance of any disc brake-equipped bike. Utilizing a 2-piece construction design, the LR2 rotors have a stainless steel braking surface to provide quiet, consistent stopping power. The lightweight aluminum inner spider features an integrated concentric ring and reinforced rivet joints to resist warping and improve durability. - Stainless steel machined braking surface resists corrosion and is tuned to reduce braking noise - Aluminum spider helps keep weight to a minimum - Compatible with all popular disc brake pad compounds (organic/resin, metallic, and semi-metallic) - Available to fit on ISO 6-bolt or Center Lock hubs, Jagwire offers options for nearly any disc brake bike - 6-bolt rotors include T25 mounting hardware - NOTE: LR2 rotors are NOT compatible with brakes with pads extend that below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1
$69.99 - $79.99
The Odyssey Evo 2.5 Brake features a wider space to accommodate larger tires. - Forged from aluminum for strength - More clearance for larger tires - Front or rear brake compatible - Includes all necessary hardware
$76.99 - $79.99
Shimano Ultegra R8070 flat mount hydraulic disc brake caliper. - Model Number: BR-R8070 - Brake Type: Hydraulic disc brake - Average Weight: 280 g/pair - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Sleek integration into a road bike's aero profile - Designed to integrate seamlessly with a road bike's profile - Flat mount hydraulic type - Better heat dispersion than current road disc systems (SM-RT800) - New construction provides better heat management than current ICE TECHNOLOGIES FREEZA
$79.99
The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$72.00 - $78.00
Smooth, controlled braking is yours with Avid's HSX Rotor. It utilizes cross-drilled technology to dissipate heat and shed water, giving you a consistent feel at the lever and predictable speed control in all conditions. And, an aluminum carrier cuts down on the weight.
$76.00
Disc brake lever assembly - aluminum lever (assembled, no hose) diffusion black ano - mineral fluid brake - DB8 (A1)
$74.99
- Lightweight aluminum spider design improves stability and durability - Durable stainless steel resists corrosion - Compatible with all disc brake pad compounds
$64.99 - $74.99
TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring
$74.47
Magura MT Sport Disc Brake Caliper black - 0-degree tube connector - Includes brake pads
$74.00
SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.
$37.97 - $73.43
- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved
$71.99
BL-M4100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-MT410 - Long-lasting performance and quick - Easy installation and adjustment - Superior modulation gives you the power you need - Quick piston retraction - Lightweight 2-piston disc brake caliper - Pre-assembled and bled brake lever and caliper, with SM-BH59-SS hose & mineral oil - Without rotor and adapter - One-way bleeding system
$71.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.
$70.00
The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is no-nonsense performer, but don’t let its understated disposition fool you—Level gives you the art of braking in minimalist form.
$53.99 - $69.99
- SLX / 105 level Center-Lock rotors - Ice-Tech construction uses stainless steel brake surfaces with an aluminum core - The higher heat dissipation of the aluminum helps to reduce the surface temperature - High stopping power and practically no signs of fading - Features an external serration lockring (BB-type tool), compatible with all axle types
$64.99 - $69.99
TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness
$69.99
TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.
$69.60 $87.00 20% Off
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts