Brakes/Levers/Pads

The Magura MT5 HC Disc Brake and Lever set offers excellent braking performance at an unbeatable pricepoint. - The 4-piston brake caliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation - Flip-flop lever design works on right or left side with either brake - 1-finger lever blade

Dominion replacement disc brake pads are used to maintain optimal performance with Hayes disc brakes.

- High performance compounds recommended for all-conditions - Steel backing

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

- Class adapted for use on eBike's, motorcycle racing's proven 4-piston technology creates an absolute maximum of braking force. - Motor cut off - HIGO Closer - For E-Bikes up to 45 km/h - Position: Front or Rear - Hydraulic Hose Length: 2200mm - Fluid: Mineral oil - Lever Blade Material: Aluminum

Magura mdr-c disc brake rotor - 203mm 6-bolt for ebike silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin - Disc Pad Material: Resin - Pad Shape: Shimano G-Type/F-Type/J-Type - Backplate: Aluminum - Pad Spring: Included - Cooling Fins: No - Model Compatibility: BR-M8000

Disc Brake Adapters

Magura Caliper Cover Ring Kit

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Characteristics: - smooth feel in the brake lever - predictable and progressive brake power - very high durability - consistently quiet operation Fits: Shimano - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

ENVE replacement brake pads for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Our brake pads are specifically formulated and optimized for best performance with our molded-in texture brake tracks found on the Smart ENVE System (SES) wheels. - Only for use with the updated brake track found on ENVE SES 2.2, SES 7.8, and most recent versions of SES 3.4, and SES 4.5 wheels.

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

Fit for modern times. The updated SRAM Force brakeset pairs mechanical rim braking with our wireless Force eTap AXS group. The dual pivot design also accounts for wider road tires without compromising braking power. - Dual pivot design increases braking power and enhances progressive feel - Wider clearance for modern tires and wheelsets (up to 28c) - Updated finish to match SRAM Force eTap AXS - Includes SwissStop pads: Platinum Flash Pro pad (carbon rims) or BHP pad (aluminum rims) - Pad type: Cartridge - Reach: Standard

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is no-nonsense performer, but don’t let its understated disposition fool you—Level gives you the art of braking in minimalist form.

- Shimano, BR-M575, E01S, Metal disc brake pads, pair, E-type, Y8FL98010

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Shimano disc brakes.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

- Optimum Heat dissipation - Reliable performance from Cyclecross to Downhill - High durability, even in the toughest conditions - UCI approved for road competition - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

The eeBrake G4 is the fourth generation eeBrake featuring 100% CNC machined parts and a wider design optimized for 22-28mm rims. It features a stiffer black arch spring, a revised one-piece center adjuster with built-in resistance for easier use, and ghosted laser etching that will stand the test of time. All with the same stopping power and light weight that you've come to rely on from eeBrakes. - The eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation - The cross cable path aligns the brake cable over the center of the brake which provides a clean and aerodynamic line, moving the cables into the "wind shadow" of the frame - Tool-free caliper centering adjustability provides super-precision and pad motion consistency - One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire, allowing for easy wheel removal - Optimized to work with Shimano, Campagnolo, and SRAM levers

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA

Maximum performance, steep slopes, and high speeds are manageable and attainable only when armed with total safety and confidence in powerful, modulable braking. The new Super Record brakes ensure the shortest braking distance and continuous total control of the braking power transmitted thanks to the new Super Record shifting system and Campagnolo's proven experience in brake block compounds. Campagnolo developed the Dual Pivot fulcrum system because the Super Record users demand exceptional braking performance. The titanium screws also enable you to reach a level of weight and aesthetic impact on par with Super Record standards.

- Super light due to the Carbotecture SL housing - High braking power thanks to the new ergonomic 1-finger HC Carbon lever blade - Suitable for mounting left or right - Reach Adjust: 3mm allen key

Magura mdr-c ebike disc rotor - 203mm center lock w/ lock ring for quick release axle silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design - Equipped with a center lock mount for corresponding hubs - Center Lock with lockring for quick-release-axle (internal tool intervention)

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: SRAM - HRD - eTap HRD - Level Ultimate,TLM

- Compound designed considering the higher weight and faster speed of E-bikes - Tuned for power, durability, and low noise

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

Cover kits for Magura brake levers.

Magura Caliper Cover Ring Kit

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

Magura service kits come in a variety of packages to fit your needs.

Lockrings for Magura rotors.

8 Series Disc Brake Pads - Disconnected two piece back plate - The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes - Set of four disc brake pads and two pad retaining bolts for one caliper

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

The Shimano GRX BL-RX600 shifter offers greater rider control for mixed-terrain riding thanks to Shimano's category-leading hydraulic disc brakes. Lighter shift action and gravel-specific ergonomic shape offer more control on bumpy terrain. - Gravel-inspired lever and bracket ergonomics - Anti-slip brake lever - Greater mixed-terrain control - Designed to be used with a 1x gear setup

Level Ultimate is the master of two forces—power and weight—in one sleek, durable design. In this build, we took every gram to task. Carbon-fiber lever blades for crisp, clean pulls. A new two-piece, two-piston caliper for superior heat management and smooth piston actuation. With Ultimate, total control is at your fingertips. - Modern XC power for today's most demanding races - Pivot bearings offer crisp lever feel and a fatigue-free ride - Engineered for easy installation and maintenance

A drilled out lever blade shaves weight as well as improves grip. This is a full hydraulic disc brake system for drop bars. It sports an integrated master cylinder in the low-profile, ergonomically shaped lever body. This brake is for singlespeed aficionados, the rider who wants simplicity without sacrificing braking performance. Using our Hylex Di2 Adapter Kit this system can be used with a Di2 drivetrain. For product manuals see support page or click here. Not sure if your caliper is post mount or flat mount please contact our customer support team. SPECIFICATIONS - A separate bleed kit is required for shortening brake lines - Hylex RS uses 5.5mm hose - Front Brake is a left-hand lever attached to a hose coupler and 800mm of hose - Rear Brake is a right-hand lever attached to a hose coupler and 1800mm of hose - Full Open Hydraulic System - Ergonomic and perfectly sized hoods create a natural extension from the rider's hands to the bike - Utilizes TRP's semi-metallic pad compound - Compound works well in dry conditions but may wear quicker in wet/muddy conditions - Post mount version compatible with Shimano M525/M515 pads - Flat mount version compatible with Shimano K02S/K04S pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter

- High performance compounds recommended for all-conditions - Steel backing

Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade

Shimano Replacement pads for Mountain brake shoe. - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R Ceramic: For use with ceramic side-wall rims only

Origin-8's one-stop-shop ATB V-brake Kit has all you need to stop your bike: levers, cables, housing, and brakes. For easy installation and set-up, the forged aluminum brakes feature dual spring tension adjustment while the levers sport reach adjustment.

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

Jagwire's LR1 Pro Lightweight Rotors are a stylish way to upgrade the performance on your bike. Utilizing a 2-piece construction, they feature a separate aluminum spider and stainless steel brake track. The steel braking surface delivers quiet, consistent performance while the spider helps reduce rotating weight by about 15% compared to a traditional single-piece rotor. - The high quality, durable stainless steel machined braking surface ensures consistent stopping power and superior modulation - Lightweight aluminum spider keeps weight to a minimum - Available for either Center Lock or 6-Bolt ISO hubs - NOTE: LR1 rotors are NOT compatible with brakes when the pad extends below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1

Smooth, controlled braking is yours with Avid's HSX Rotor. It utilizes cross-drilled technology to dissipate heat and shed water, giving you a consistent feel at the lever and predictable speed control in all conditions. And, an aluminum carrier cuts down on the weight.

Jagwire's Pro LR2 rotors are made to improve the performance of any disc brake-equipped bike. Utilizing a 2-piece construction design, the LR2 rotors have a stainless steel braking surface to provide quiet, consistent stopping power. The lightweight aluminum inner spider features an integrated concentric ring and reinforced rivet joints to resist warping and improve durability. - Stainless steel machined braking surface resists corrosion and is tuned to reduce braking noise - Aluminum spider helps keep weight to a minimum - Compatible with all popular disc brake pad compounds (organic/resin, metallic, and semi-metallic) - Available to fit on ISO 6-bolt or Center Lock hubs, Jagwire offers options for nearly any disc brake bike - 6-bolt rotors include T25 mounting hardware - NOTE: LR2 rotors are NOT compatible with brakes with pads extend that below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

The ergonomics on the Shimano Dura-Ace ST-R9270 dual control levers bring new levels of comfort and control to road cycling. With fast wireless shifting and precise brake modulation, Dura-Ace redefines performance. The Dura-Ace BR-R9270 hydraulic 2-piston calipers are sleek and compact. Mono-body construction ensures light weight and rigidity, proving that good things can come in small packages. - The wireless connection provides a clean cockpit, enhancing the aesthetic of your bike while keeping shifting lightning fast - 1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries - Wider pad clearance decreases the chance of rotor rub - Raised hood peak improves ergonomics, while a longer hood body increases hand support - Compatible with satellite shifters - Maintenance-friendly bleeding process

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability