Derailleurs

- Rider Tuned For Sharp And Silky Shifts - 20% Light Shifting Operation - New Shadow Design With Optimized Slant Angle - Optislick New Shift Cable With New Hyper Low-Friction Coating Technology - Chain Stability Improved - New Shadow Design With Optimized Slant Angle For Stable Gear Position - Efficient Shifting And Smoother Driving - Efficient Pulley Teeth Design - Increased Traction Range For Long-Travel And Active Rear Suspension - Series : SLX: SLX - Maximum Sprocket : 42T(2x11-speed) or 46T(1x11-speed) - Minimum Sprocket : 11T: 34-38T - Front Difference : 10T: 48.8 - Total Capacity : 41T: 66-69 - Average Weight : 323g: 145.6g

SLX has always been Shimano's workhorse group: seriously solid performance, reasonable weight and all-mountain toughness. Well, this M675 version gets some trickle down features from XTR that are bound to make trail riders rejoice. This Shadow Plus derailleur retains the tucked-in Shadow profile that makes you less likely to tag it on trailside obstacles. And the Plus part is a one-way clutch that dramatically stiffens up the cage so chain slap, dropped chains, and all the associated noise are basically a thing of the past. It all adds onto SLX's legendary workhorse status.

If you're looking for a high-quality, precision-shifting, light front derailleur, you've found it in Shimano's Ultegra. It's made of cold-forged aluminum with their wide-pivot design that stops flex for smooth, fast and exact shifts, even under load. And this fine derailleur is built tough for reliability and durability, too.

Run silent, run deep. Shimano's ZEE rear derailleur uses a short cage and a Shadow profile to keep tucked out of the way of rocks, roots, whatever. The Plus part is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and the noise that goes with it, as well as dropped chains, are virtually eliminated. Of course, it still has the smooth action and sniper-like shifting that Shimano is rightly famous for. Freeriders and trail riders can run a typical MTB cassette like an 11-32, 11-34, or 11-36. And DHers can choose the close-ratio version and run a road cassette like 11-23, 11-25 or 11-28.

SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.

- SHADOW low profile design - Min cog size : 11T - Max cog size : 34T - Max front difference : 22T - Capacity : 45T

Designed with the rider in mind, the ADVENT rear derailleur packs trail-ready features into an attainable wide-range drivetrain system. The derailleur kinematics are precisely tuned to use a more direct cable path, making the shifting feel consistent across the lowest and highest gears, and everything in between. - Clutch provides stronger chain management over rough terrain - Ratchet-and-pawl clutch is easily adjustable and repairable - Direct cable routing for smooth, responsive shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only

Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible

- 1x11-speed SHIMANO SHADOW RD+ rear derailleur - MTB: Direct attachment (Shadow+) - 11T Min top Sprocket - 51T Max Low Sprocket - Stable drivetrain on the trail - Low-profile design avoids damage from rocks - Chain stabilizer reduces chain drop, slap and noise - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - Bigger 13T pulley

Incredibly fast, astonishingly quiet, and impressively precise—fly through all 11 gears with SRAM's Rival 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. Aluminum inner and outer cages, aluminum links, and stainless steel hardware keep the durable Rival 22 at a svelte 180 grams.

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience and shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain tensioner. - Adjustable chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Gravel-tuned clutch tension - Maximum front T difference: 16T - Silent and uninterrupted rear shifting on rough terrain - Low cog: Max. 36T/Min. 30T - High cog: Max. 11T/Min. 11T - Total capacity: 41T - Smooth and reliable mixed-surface shifting - Compatible with current 10s road DUAL CONTROL LEVER - Compatible with wide-range front gearing

Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams

SRAM's Force 22 Front Derailleur gives you the freedom to shift with incredible speed into either chainring. Experience precision shifting with YAW technology that allows the cage to rotate to better align with the chain and eliminates the need for shifter trim. An integrated chain spotter is included for seriously bumpy roads and cyclocross action. Paired with SRAM's X Glide R chainrings, unmatched front shifting will be the norm on your bike.

- 1x12-speed SHIMANO SHADOW RD+ rear derailleur - MTB: Direct attachment (Shadow+) - 10T Min top Sprocket - 51T Max Low Sprocket - Fast and precise shifting for modern mountain biking - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - Bigger 13T pulley - Stable drivetrain in rough terrain - Low-profile design avoids damage from rocks - Chain stabilizer reduces chain drop, slap and noise

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

Shimano's Tiagra Rear Derailleur GS (10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: RD-4700-GS - Series: Tiagra - Cassette Compatibility: 10 - Maximum Sprocket: low sprocket: 34T / top sprocket: 12T (front double) / 20T low sprocket: 32T / top sprocket: 12T (front triple) - Minimum Sprocket: low sprocket: 28T / top sprocket: 11T (front double) / 20T low sprocket: 25T / top sprocket: 11T (front triple) - Maximum Front Difference: 16T (front double) / 20T (front triple) - Total Capacity: 39T (front double) / 41T (front triple)

Shimano's Tiagra Rear Derailleur SS (10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: RD-4700-SS - Series: Tiagra - Cassette Compatibility: 10-speed - Maximum Sprocket: low sprocket: 28T / top sprocket: 14T - Minimum Sprocket: low sprocket: 25T / top sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 33T

The Shimano GRX RX-810-F front derailleur offers lighter front shifting operation and easier setup thanks to the new link construction and integrated cable tensioner. It features a 2.5mm outboard chain line design to allow wider tire clearance for mixed-terrain riding. The RX-810-F also accommodates a 17T front chainring range for wider gearing options. - Ergonomic power curve - Integrated cable tension adjustment - Natural stroke feeling - Chainline +2.5 mm vs. conventional road FD - 17T front range - More cable routing options - Lighter front shifting - Wider tire clearance - Wider range front gearing - Precise and easy front derailleur adjustment

Shimano's groundbreaking 6800-series front derailleur delivers a shorter stroke at the lever and substantially lighter action for lightning fast shifts with just a flick of your finger. The redesigned pull arm offers more direct tactile feedback during shifts. The derailleur support bolt creates more solid contact to the frame, stiffening the derailleur and stabilizing it for faster, smoother shifts.

SRAM's X5 10-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.

SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.

Shimano's Alivio Rear Derailleur is built to withstand the rigors of off-road riding, with a lightweight aluminum body and low-friction pivots for incredibly easy and smooth shifting. And, the Alivio features 11-tooth pulleys, which alternate chain-link contact reducing wear and smoothing pedaling.

Shimano's Tiagra Front Derailleur (3x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with cascaded technology from the top shelf Dura Ace line. - Model Number: FD-4703 - Series: Tiagra - Cassette Compatibility: 10 - Top Gear Teeth: 50T - Maximum Capacity: 20T - Chain Stay Angle: 63-66 - Chain Line: 45 - Band Mount: 28.6mm / 31.8mm (w/AdapterS) 34.9mm

The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

SRAM's Rival 22 Front Derailleur delivers precision shifting with YAW technology. The steel cage with aluminum links ensures strength and durability. • Yaw cage rotates in line with chain, improving the shifting speed and precision while eliminating the need for shifter trim • Integrated chain spotter protects your frame, installs and adjusts independently of the derailleur itself • Precision alignment markings on the cage • Clamp: braze-on • Weight: 89g with Chain Spotter

Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

- 10/11 Speed compatible - MTB: Direct attachment (Shadow) - 42T Max Low Sprocket - 11T Min top Sprocket

- Model Number: RD-R3000-GS - Series: SORA - Maximum Sprocket: 34T - Minimum Sprocket: 11T - Maximum Front Difference: 20T - Total Capacity: 43T

Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9

- Adjustable chain stabilizer - Alloy cage and links - Max rear sprocket is 50t with 1X setup & 46t with 2X - 9 speed compatible

XLE Rear Derailleur for 10-speed Shimano drivetrains - For MEGA Sprockets w/large cog size 36-42T - Compatible with single, double, or triple cranksets - Total Capacity: 47T

The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options

Shimano's Acera rear derailleur makes use of advanced designs that make it shift better and last longer. HyperGlide technology results in faster shifting, and Double Servo technology utilizes a double servo-panta mechanism that enables the rear derailleur to track perfectly to each shift and maintain an optimum distance from each sprocket. - Maximum cog size: 34t - Total capacity: 45t - Pulleys: 11t - Chain compatibility: HG 9-speed

Shimano's Deore Front Derailleur delivers smooth shifting and less cadence shock along with top-notch durability. Made for triple-ring set ups, it's 10-speed compatible. You'll get stable performance, even with full suspension MTB, as it shifts properly while the rear suspension handles rough trails and obstacles. - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - Close step (10T) - Efficient cable routing - OPTISLICK cable - Swing Action: side swing - Top Gear Teeth: 40-42T - Chain Line: 50 - Chain Stay Angle: 66-69

- Model Number: RD-R3000-SS - Series: SORA - Maximum Sprocket: 32T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 37T

- 2:1 actuation ratio compatible with most Shimano 3x9sp drivetrains - Aluminum and steel construction with 11-tooth pulleys barrel adjuster

Features: - Smooth shifting and less cadence shock - Close step (10T) - SIDE SWING construction - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed

- Model Number: FD-R3000 - Series: SORA - Top Gear Teeth: 46-52T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed

Shimano's 105 Braze-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability. For use with 11-speed drivetrains.

- Spring type: Top Normal - Min cog: 11T - Max cog: 34T - Total capacity: 43T

Not everyone needs the added chain retention provided by our innovative SpringLock system. For those riders, we offer a non-clutch version of our Acolyte derailleur. While still capable of handling a 12-46T cassette, the rear derailleur is the perfect choice for commuter or touring bikes that can benefit from using a wide range 1x gearing system. - Direct path cable routing for smooth and responsive shifting - Compatible with 12-42T and 12-46T 9-speed cassettes - Compatible with Acolyte shifters only

R10 front derailleurs work with 10-speed Shimano-compatible road shifters. Designed to work with a variety of chainring combinations, these workhorse components will get you rolling again. - Cold-forged aluminum body

Shimano Claris front derailleurs offer, smooth easy shifts and are compatible with dual-control road shifters as well as flat-bar style Rapidfire Plus shifters.

- Cover up those unfinished and unused FD mounts with MRP cover plates - Offered in Decapitator version with built-in bottle opener - Alloy with matching alloy fastener, 12g - Made in Grand Junction, CO USA

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. Marvo LT rear derailleurs are built with precision rigid aluminum construction. Let these miracle workers get any bike rolling again. - Lightweight aluminum construction - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

The Shimano Tourney RD-A070 rear derailleur provides durable and reliable shifting for 7-speed drivetrains. - Smartcage design with 11/13t pulleys allows for short cage and a 28t max low cog - Maximum cog size: 28t - Total capacity: 37t

R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.

R-series rear derailleurs are designed to work with 8 and 9-speed Shimano-compatible road shifters. These R8 rear derailleurs have composite and steel parts that weigh more but have the same durability and performance as R9 and R10 derailleurs. - Steel pulley cage for extra durability - Not compatible with Shimano Tiagra 4700 road system - Short cage for double crankset and 28T max cog - Long cage for triple crankset and 28T max cog

FD-A073 Tourney Front Derailleur for 2x7 or 3x7 drivetrains. - SG-X chainring compatible - Quick assembly - Interchangeable with SHIMANO road 7-speed system - Easy adjusting - Light operation and smooth shifting

Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high end performance that will last.

- 11-34T - Weight—354g

Enjoy the ride with SRAM's 3.0 Front Derailleur. It provides crisp, precise front shifts for fast, smooth, and reliable shifting season in and season out.

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 66 - 69 degrees

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Wheel-type cable guide - Maximum cog size: 34t - Total capacity: 43t

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems