WTB's Dual Compound grips are perfect for XC, trail and comfort riding. They feature plush outer gel and tight, twist-resistant bases for comfort and control. And, the linked, diamond-shaped WTB logos and slightly raised centers provide an ergonomic feel and maximum grip in tough conditions.
Tom Dugan’s signature grip features a timeless coil pattern, along with a feather design across the heavy wear areas. By using two molds you’ll notice feather angle symmetry once they’re installed. Par Ends included.
- Smaller diameter and shorter length (105mm) comfortable grip made from elastomer material that lasts longer than conventional grip rubber - The softness of the single compound grip will keep your hands feeling pampered while riding
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13
- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair
The GP grip with a full-size comfort bar end delivers maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling when touring or on fitness bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP4 eliminates numb hands, aching fingers, and tired forearms. The GP4 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars)
The GC1 was developed for the ergonomic demands of cyclists riding city bikes, beach cruisers, or touring bikes with upright, rearward-swept handlebars. Using traditional round grips on these specific, laid-back handlebars causes an uncomfortable bend in the wrist. The GC1 corrects the wrist position through its anatomic and ergonomically correct form, delivering exceptional comfort. The GC1 is made from 100% German, TÜV-certified rubber compounds of the purest quality. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.
Combining ergonomics, function, and sustainability, the GP1 BioKork has been a top-rated grip and a consumer favorite. The grip is made from 40% cork, sourced from sustainable forests in Portugal. This green, sustainable theme is echoed throughout the complete construction of the grip with an inner core made of a reinforced plastic utilizing natural fibers which makes up 20% of its mass. - Carbon bar compatible - Clamp: cold forged aluminium – 100% recyclable - Uses: mountain bike, touring, commuting
Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
Feel the comfort of Lizard's popular Charger grip. The unique pattern gives the Charger grip an amazingly comfortable feel that is soft yet long lasting. Lock-on grips include the grips, clamps, screws and plugs. Length: 130 mm Weight (with plugs): 105 grams Diameter: 31.25 mm
Salsa's Backcountry Grips are constructed of sticky, durable, supple rubber and are sized for comfortable use with or without gloves. - ADV BY BIKE text blocks sized for comfort with or without gloves - 143mm overall length
Salsa's Backcountry Lock-On Grips provide confidence, comfort and style. They feature sticky rubber that's tapered up towards the lock-ring for a sure-fire grasp, a single-sided lock-on collar and they're sized for both glove and non-glove use. - ADV BY BIKE text blocks sized for comfort with or without gloves - Single-sided lock-on collar - 134mm overall length including the locking collar - Grip tapers up towards the lock-ring for comfort and security - Only Compatible with Salsa Lock-on Collars
WTB's Technical Trails feature built-in zip-tie channels to keep them stable in sloppy conditions. And, these slim grips are easy to cut and are compatible with trigger and grip shifters.
WTB's Comfort Zone Clamp-Ons feature an ergonomic shape with a soft rubber. This design gives you more surface area to hold, absorbs shocks and vibrations, and prevents hot spots in your palms.
Add a big dose of comfort and style to your ride with Profile Design's DRiVe handlebar tape. The plush padding and soft, textured grip offer an ideal blend of on-the-road comfort and minimal bulk.
The BioKork version with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Cannot be used on carbon handlebars - Bar end material: fiberglass composite with rubber inserts - Uses: touring, commuting
Profile Design's Perforated Handlebar Tape offers grip, comfort, and a soft, suede feel.
All Mountain / Gravity grip with non-biased layout. The GA2 has a superb tactile feel thanks to the new super soft, UV stable rubber compound, which is exclusively developed and manufactured in Germany for Ergon. This translates on demanding trials into more control. The ergonomic optimized form allows reduced force to be used when gripping, as the grip zones are matched to the hand. The inner construction varies in thickness to allow greater damping. The inboard clamp allows even more grip area at the end of the bars, and is completely secure and carbon bar friendly. New cool colors increase the style factor. Only 3.8 oz. (107 g) per pair.
Piloted to two Marathon World Championship titles and the Leadville 100 course record! The Ergon GS1 combines comfort and support in a lightweight package for endurance athletes. The exclusive German-produced rubber compound enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC
Add some toughness to your ride with Electra's Skull Grips. Their chrome plated metal skull bar ends add fierce style and durability while the soft rubber hand area provides awesome comfort.
Add some classic style to your favorite rig with Electra's Hand-Stitched Grips. You'll love their stylish hand stitching and long-lasting comfort.
Relive the memories of your first bike with Electra's Finger Groove Grips. These retro grips comfortably keep your hands where they belong. And, they come in a variety of colors to match your bike!
Electra's Ergo Grips feature supportive curves and cool stitching. With these stylish grips on your favorite rig, your hands will stay comfortable all ride long.
Looking to shave some weight off of your front end? Slide on Bontrager's RXL grips and you'll get a comfortable grip made from lightweight EVA foam. That was easy.
Take the long way with the XR Endurance Comp grip. A contoured shape provides comfort and support, while an opposing tread pattern ensures your palms are padded and your fingers remain confidently in place. This Dual-Density grip features a lightweight, durable lock-on design that securely attaches to any bar. Key features - Contoured design comfortably supports palm to decrease fatigue - Opposing tread design absorbs shock in palms with a biting grip in fingers - Dual-density compound design provides secure grip, control, and comfort - Continuous tread design optimizes grip for moisture management and shock absorption - Lock-on clamp securely holds grip core to bar, eliminating slipping
Take care of your hands with an ergonomic, paddle-shape design that evenly distributes pressure across your hands and helps reduce hand fatigue. The Satellite Elite Grip features a dual-density compound that offers variable padding and unparalleled vibration absorption to ensure comfort on every ride. Key features - Dual-density compound design provides secure grip, control, and comfort - Contoured design comfortably supports palm to decrease fatigue - Lock-on clamp securely holds grip core to bar, eliminating slipping
Electra's Comfort Kraton Grips offer an amazingly plush feel and design that matches that natural curve of your hand for extra comfort and security.
WTB's Original Trail grips are ideal for XC, trail, and city riding. With their smooth, octagonal shape, DNA rubber compound and small flanges, the Originals are comfortable enough for lunch-hour loops and all-day epics.
Feel the comfort of our popular Charger grip. The unique pattern gives the Charger grip an amazingly comfortable feel that is soft yet long lasting. Single compound grip includes push in plugs. Length: 130 mm Weight (with plugs): 95 grams Diameter: 31.75 mm
Page 1 of 6 Next page