Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Handlebars

$179.99
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
$179.99
XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.
$179.99
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
$176.95
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
$158.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$158.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$145.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
$139.00
A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum
$118.00
The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty
$118.00
The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's Service Course bars. Together with its 128mm drop, the bar is deal for riders preferring a low body position. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Matte Black nano blast aluminum - Clip-on Compatible - Lifetime warranty
$118.00
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Di2 RS910 junction compatible - Lifetime warranty
$118.00
The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty
$115.00
The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind. - UD carbon and AL6066 material - Carbon Structural Integration (CSI) - Textured stem clamp zone - 18mm rise - 9° backsweep, 4° upsweep - UD carbon finish
$110.45
- The Fatbar has already gained cult status and is the handlebar of choice for World Cup downhill race teams and athletes. - Offers the ultimate combination of lightness, strength and durability
$110.00
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black
$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability. - Multi-Butted, traditional 7/8" crossbar for strength - Large radius bends for greater durability - Welded end caps to reduce flex - Post-weld heat-treated for added strength
$104.99
An aluminum handlebar with IsoZone pads that displace vibration and a compact flare that increases wrist clearance. Integrated comfort Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. This alloy bar features a Variable Radius Compact Flare (VR-CF) shape for extra room in the drops. - Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup
$99.99 - $104.99
An aluminum handlebar with IsoZone pads that displace vibration and a compact flare that increases wrist clearance. Goodbye, chatter Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Soak up the chatter and ride on in comfort while enjoying a better looking cockpit. Product details - Custom-butted, 6066-T6 alloy construction - Confidently access brake levers while in the drops with our VR-SF shallow, flared drop and shorter reach design - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control set-up
$104.99
A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain. The bar with a flare for adventure The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions. Product details - 13-degree flare allows for more control in the drops - Custom-butted, lightweight 6061-T6 alloy construction - Shorter reach and wider flare allows for confident handling and easy access to controls - Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars
$104.99
A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components
$100.00
- Offers brake positioning of a flat bar with the multiple hand positions of a drop bar - Great for commuting, tandems, endurance racing, dirt drop riding - When switching from drops to moustache, go 20-40mm shorter stem extension - Rigid aluminum construction - 51.5cm width - 50mm drop - 95mm reach - 26mm clamp
$100.00
The Surly Corner Bar is for off-road riders who want to give drop bars a try without swapping out the drivetrain and brake levers on their current mountain setup. Does that make it an economical option for fresh excitement on the trail? Yes, it does. - Chromoly steel with custom-butted tubing - 22.2mm grip diameter - 25.4mm clamp diameter - One set of 25.4/31.8 x 60mm Problem Solvers shims included
$100.00
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
$99.99
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on gnarly terrain and long gravel assaults. - Weight of 42cm bar (grams): 290 - Bar Drop (mm): 80 - Drop Bend Style: Compact - Bar Reach (mm): 120 - Material: Aluminum - Bar Top Style: Round
$99.99
The EA70 is Easton’s top-end aluminum handlebar with traditional, round tops. The EA70 is given an upgrade with the new MCD shape technology, with grooves for brake and gear cable routing. This race-proven handlebar has won numerous Cyclocross Nationals titles and benefits from all of the aluminum construction techniques that Easton is famous for — including TaperWall technology. - Weight for 42cm bar (grams): 280 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Aluminum - Bar Top Style: Round
$99.99
- Aerodynamic integrated Cable Routing (ACR) - Alloy handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Stem Clamp Diameter: 31.8mm - 120mm drop, 80mm reach - 15° outward bend - Finish: Bead blasted anodized black - Weight: 292 grams (420mm)
$99.99
We threw in a bit of everything for our take on the ultimate gravel handlebar setup. Rise, sweep, and flare make for an ultra-comfortable handlebar that keeps you in control no matter the terrain. Add the Cruise Control Top and Drop Grips and our Really Long Bar Tape to get to next-level comfort and performance. For the rider that wants to go everywhere, the Kitchen Sink Handlebar is the bar that has everything. With widths from 44 cm up to 50 cm, it's clear we believe in wide. But the added stability and control of a wider bar should not come at the cost of comfort. So we've thrown everything into this handlebar: - 20mm RISE means less pressure on the hands and a broad range of fit options. - 7° SWEEP means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops. - 25° FLARE on a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use. - Optional endurance loop adds an alternative aerodynamic riding position and a perfect spot for gear storage and mounting accessories.
$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)
$96.00
FSA's Energy Compact handlebars push aluminum technology as far as it can go. Cutting-edge manufacturing allows us to form and manipulate high-strength 7050 aluminum tubing, varying the wall thicknesses and diameter throughout the bar. There's even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. A shallow drop and short reach are ideal for riders looking for a less aggressive riding position. The finish is sandblasted black on the taped areas for grip, with stylish polished anodizing on either side of the stem. - Aerodynamic Integrated Cable Routing (ACR) compatible - Semi-integrated Cable Routing (SCR) compatible - Double butted and tapered AL7050 - 34mm Ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails - Outward Bend: 4°
$91.00
The DRV/AEROa is a high-performance aluminum aero drop bar featuring a truncated airfoil for aerodynamics, comfort and stiffness. The curve has been optimized for modern road levers. The innovative fit and ergonomics of the DRV system include a 7° ramp angle and a 4° flare in the drops, allowing a natural wrist angle for enhanced comfort and control. The DRiVe metric by Profile Design pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. What is your DRiVe? Gone are the days of simply measuring a drop bar by the standard reach, drop and width. Our DRiVe metric pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. - The DRiVe Metric: The DRiVe (Drop Reach Variant) position is measured via a 73° line beginning at the bar bore. The DRiVe metric pinpoints the line intersection with the drop. - DRiVe Reclaims Comfort, Power & Control: Modern drop bar designs are deeply tied to tradition. They are designed based on outdated road bike sizing rendering many of cycling intended hand positions unattainable when riding modern frame geometry. The ride positions that are the most powerful and allow for the most control have now shifted into virtually unattainable positions. DRiVe reclaims many of the ideal positions most critical to comfort, power, and control. - Fit Made Simple: To predict the DRiVe position of any given rider, we looked at an anthropological study focusing on the correlation among handbreadth, shoulder width, and height. By measuring your handbreadth we can easily identify a DRiVe that will be compatible with your body type. - Progressive Ergonomics: The tops and hoods complement the powerhouse DRiVe position and the Reach and DRiVe are progressively sized as the bar increases in width. This progressive sizing ensures the most powerful positions remain right where they are needed. - Weight: 315g (38cm) - Size: 36, 38, 40, 42, 44cm (center to center) - Reach: 70, 75, 80mm - Clamp Width: 100mm - Clamp Diameter: 31.8mm - Clip Compatible: Yes - Drop: 122mm, 136mm, 148mm - Drop Outsweep: 4° - Drive: 105mm, 120mm, 135mm - Internal Cable Routing: Yes (Mechanical / Di2) - Max Brake Lever Torque: 10Nm - Max Torque Clamping to Bar: 6Nm - Material: 6061-T6 AL
$91.00
The DRV/AEROa is a high-performance aluminum aero drop bar featuring a truncated airfoil for aerodynamics, comfort and stiffness. The curve has been optimized for modern road levers. The innovative fit and ergonomics of the DRV system include a 7° ramp angle and a 4° flare in the drops, allowing a natural wrist angle for enhanced comfort and control. The DRiVe metric by Profile Design pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. What is your DRiVe? Gone are the days of simply measuring a drop bar by the standard reach, drop and width. Our DRiVe metric pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. - The DRiVe Metric: The DRiVe (Drop Reach Variant) position is measured via a 73° line beginning at the bar bore. The DRiVe metric pinpoints the line intersection with the drop. - DRiVe Reclaims Comfort, Power & Control: Modern drop bar designs are deeply tied to tradition. They are designed based on outdated road bike sizing rendering many of cycling intended hand positions unattainable when riding modern frame geometry. The ride positions that are the most powerful and allow for the most control have now shifted into virtually unattainable positions. DRiVe reclaims many of the ideal positions most critical to comfort, power, and control. - Fit Made Simple: To predict the DRiVe position of any given rider, we looked at an anthropological study focusing on the correlation among handbreadth, shoulder width, and height. By measuring your handbreadth we can easily identify a DRiVe that will be compatible with your body type. - Progressive Ergonomics: The tops and hoods complement the powerhouse DRiVe position and the Reach and DRiVe are progressively sized as the bar increases in width. This progressive sizing ensures the most powerful positions remain right where they are needed. - Weight: 315g (38cm) - Size: 36, 38, 40, 42, 44cm (center to center) - Reach: 70, 75, 80mm - Clamp Width: 100mm - Clamp Diameter: 31.8mm - Clip Compatible: Yes - Drop: 122mm, 136mm, 148mm - Drop Outsweep: 4° - Drive: 105mm, 120mm, 135mm - Internal Cable Routing: Yes (Mechanical / Di2) - Max Brake Lever Torque: 10Nm - Max Torque Clamping to Bar: 6Nm - Material: 6061-T6 AL
$91.00
The DRV/AEROa is a high-performance aluminum aero drop bar featuring a truncated airfoil for aerodynamics, comfort and stiffness. The curve has been optimized for modern road levers. The innovative fit and ergonomics of the DRV system include a 7° ramp angle and a 4° flare in the drops, allowing a natural wrist angle for enhanced comfort and control. The DRiVe metric by Profile Design pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. What is your DRiVe? Gone are the days of simply measuring a drop bar by the standard reach, drop and width. Our DRiVe metric pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. - The DRiVe Metric: The DRiVe (Drop Reach Variant) position is measured via a 73° line beginning at the bar bore. The DRiVe metric pinpoints the line intersection with the drop. - DRiVe Reclaims Comfort, Power & Control: Modern drop bar designs are deeply tied to tradition. They are designed based on outdated road bike sizing rendering many of cycling intended hand positions unattainable when riding modern frame geometry. The ride positions that are the most powerful and allow for the most control have now shifted into virtually unattainable positions. DRiVe reclaims many of the ideal positions most critical to comfort, power, and control. - Fit Made Simple: To predict the DRiVe position of any given rider, we looked at an anthropological study focusing on the correlation among handbreadth, shoulder width, and height. By measuring your handbreadth we can easily identify a DRiVe that will be compatible with your body type. - Progressive Ergonomics: The tops and hoods complement the powerhouse DRiVe position and the Reach and DRiVe are progressively sized as the bar increases in width. This progressive sizing ensures the most powerful positions remain right where they are needed. - Weight: 315g (38cm) - Size: 36, 38, 40, 42, 44cm (center to center) - Reach: 70, 75, 80mm - Clamp Width: 100mm - Clamp Diameter: 31.8mm - Clip Compatible: Yes - Drop: 122mm, 136mm, 148mm - Drop Outsweep: 4° - Drive: 105mm, 120mm, 135mm - Internal Cable Routing: Yes (Mechanical / Di2) - Max Brake Lever Torque: 10Nm - Max Torque Clamping to Bar: 6Nm - Material: 6061-T6 AL
$91.00
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
$89.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted
$89.99
The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly. - Aaron Ross signature - Proven 41-Thermal processed 4130 chromoly - Multi-Butted, traditional 7/8" crossbar for strength
$89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
$81.99
FSA's Metropolis multi-position handlebar features a stylish wing shape for an ergonomic, flip-flop design at home on your commuter, cruiser, or cafe racer. Set it as a high flyer or low rider to suit your personal and riding styles. - Weight: 300g - Width: 620mm - Backsweep: 46.5­° - Lever Compatability: Mountain 22.2mm - Rise: 32mm
$80.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
$78.00
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
$75.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
$75.00
We set out to make a handlebar that’s upright, durable, and capable of resurrecting a parts-bin bike or transforming a newer slice of steel into something more. What we came up with is the Sunset Bar. We liken it to its sibling, the Sunrise Bar, with BMX-inspired style and vertical posture. Procure one yourself for a fresh take on front end grip. - Constructed with 4130 Chromoly Custom-Butted Steel tubing for enhanced strength and comfort, and finished in an anti-rust Black ED coat for longevity - Brings comfort, style, and durability by fitting a more upright position with 110mm of rise, 22-degree backsweep, and 14-degree upsweep - Adds height to frames with short steerer tubes or headtubes - Tested to comply with ASTM 3 and ISO Mountain Standards for rowdy trail riding and beyond Specifications: Material: Post-weld heat-treated Chromoly Steel Clamp Diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm Rise: 110mm Sweep Angle: 22 degree backsweep, 14 degree upsweep Weight: 827g including shims Color: Black
$70.00
The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter
$70.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
$69.95
- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum
$68.99
A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components
$62.00
The Gossamer Compact uses the same evolved shape as our high-end handlebars – shallow 125mm drop, short 80mm reach, optimized for the shape of current shifters. Rider comfort is further enhanced by the flattened top section, giving an easy platform to rest your hands on. The Gossamer Compact uses 6066 aluminum, which is double butted and tapered to put strength where it's needed and trim weight where it's not. Shot peening improves fatigue resistance, and an extra-wide bulge section in the center of the bar leaves ample room for accessories. - Double butted, tapered, and shot-peened AL6066 - 34mm ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails
$60.00
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
$60.00
For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round
$59.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for low weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - ISO 4210 compliant
$59.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Reach: 70mm - Drop: 115mm
$59.00
When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - New flattened bar top and 3° backsweep for a neutral wrist position on the tops - 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops - 80mm reach and 125mm drop for a medium-high position - 6061 aluminum for low weight and durability - Di2 RS910 junction compatible - Compatible with clip-on extensions (sold separately)
$58.00
The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 6061-T6 aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 314g (44cm)
$58.00
The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 6061-T6 aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 322g (44cm)
$57.80
- Double butted, tapered 6061 aluminum - Bead blasted anodized black
$54.99
Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 315g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Reach: 80mm - Drop: 125mm - Materials: EA50 alloy
$54.99
Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy
$54.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design
Page 1 of 2 Next page