Other

$24.95 - $29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
- Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup
- Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs
- Double chainrings are not currently supported
- Triple chainrings are not supported
- Direct Mount-native frames and SRAM derailleurs are not supported

$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility

$36.95
The Wolf Tooth Quick Release Seatpost Clamp allows for easy saddle height adjustments. An ergonomic lever on the side of the clamp opens and closes the clamp, which is held together by a bolt with a bronze bushing that lets the rider set the torque. It is friendly with carbon, steel, alloy, and titanium frames.
- Bronze bushing for smooth lever action
- Low-profile ergonomic lever
- Stainless steel bolt with spherical washer
- CNC machined 6061-T6 aluminum

$29.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.
- Design and manufactured in Minneapolis, MN USA
- 7-8 NM tightening torque with light grease on threads only
- Material - 7075-T6 aluminum
- Weight - 5 bolts = 10 grams

$18.50
Display packaged headset spacers for 1-1/8" fork steerer. Black anodized aluminum. Includes one each:
- 2.5mm
- 5mm
- 7.5mm
- 10mm

$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be.
- Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

$3.94 - $18.64
Aluminum headset stack spacers precision-cut to ensure proper headset function.
- Precision-cut for proper function
- Inner Diameter: 28.9mm
- Outer Diameter: 34.4mm
- Precision-machined aluminum

$10.45 - $20.48
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

$108.00
This assortment of chainring spacers contains 120 pcs. in a clear plastic storage box. Kit includes: - (20) 0.6mm - (20) 1.2mm - (5) 2mm - (5) 3.8mm - (5) 2.2mm - (5) 3mm - (5) 3.5mm - (10) 4mm - (10) 4.3mm - (10) 4.6mm - (10) 5mm - (5) 5.3mm - (5) 7.1mm - (5) 8.3mm

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screw

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-16 has 14.33 mm between the two holes (center-to-center) and 6.51mm between the two vertical plates.

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-17 measures 15.49mm between the 2 mounting holes (center to center) and 4.7mm between the 2 vertical plates.

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x8 Flat head screws included

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$65.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Fastener is not included - Replaces Cannondale Part # E123007-2 R3 (KP432) - For DT Swiss Thru Axle Not the same as DROPOUT-295. Check for correct thru axle fit.

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For 148 Thru Axle Frames - Replaces Santa Cruz Part #04-17052

$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Pinarello part #PI-DROP-OUT-TA-RIGHT-IN - Attaches to frame with (1) M4x14 Flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt Note: Same hanger as Wheels Mfg DROPOUT-6.

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x10 Flat Head Screws

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (bolt only)

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x8 Flat Head Screws

$32.00
The Emergency Derailleur Hanger is a great thing to bring along on rides because it lets you temporarily replace a hanger that is damaged or broken on a ride. The Emergency Hanger works with most frames and derailleurs and allows the use of most gears, and more importantly, for the bike to be ridden instead of pushed or carried. So, it ensures that you can get home safe.Mounts to virtually any dropoutWill keep your bike shifting and get you homeCNC-machined aluminum for increased durabilityBlack anodized finish

$24.42
Enduro 6806 ABEC-3 Sealed Bearing. Direct replacement bearing for most BB30/PF30 OEM bottom brackets as well as all Wheels Mfg bottom brackets for 30mm spindle cranks.
- Dimensions: OD: 42mm / ID: 30mm / Width: 7mm
- ABEC-3 - Grade 10, 5/32" chromium steel balls
- Kyodo Yushi SRL grease or equivalent
- Enduro Part # BB 6806 LLB/C3
- Imported
- Sold Bag of 2

$10.45
This Wheels Manufacturing spacer allows you to mount a 1-1/4-inch clamp front derailleur on a 1-1/8-inch seat tube.

$16.00 - $22.05
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.

$29.99
- Deluxe armrests compatible with all vision tech aero bars
- Includes dual density foam armrest pads for maximum comfort
- Non-Slip textured top

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut
Page 1 of 14
Next page