Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Trek ABP Downhill Derailleur Hanger
$17.98
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut
Wolf Tooth Components ReMote Light Action Dropper Lever
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
TRP Tektro A-11 Post Mount +20 mm Caliper Adaptor
$9.99
- Converts 140 post mount to 160 or 160 post mount to 180mm - Simplified and lower profile design allows for the use of only 2 bolts instead of 4 - Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes
Shimano 7- and 8-Speed Chain Pins
$8.00
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
Wheels Manufacturing Inc. Derailleur Hanger 78
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 117
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 173
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x10 Flat Head Screws
Lizard Skins Frame Shock Boot
$8.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
KMC Half Link Adapter
$1.50 - $2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Campagnolo Cassette Lockring
$39.90 - $55.66
- Fits 2000 and newer Campagnolo wheels - Fits all Fulcrum wheels - Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer - 27.0mm thread OD 10-speed: - For use with Campagnolo cassettes with 12 to 16 tooth first position cogs - Lockring has a 38.5mm flange diameter 11-speed: - For use only with Campagnolo 11 speed cassettes with 12 tooth first position cogs
Campagnolo EPS Front Derailleur Stiffener
$82.45
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Wheels Manufacturing Inc. Derailleur Hanger 304
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only) - For QR Axle - Replaces Pivot Part #016 (FP-RDH-QR-9MM-BLK-V1)
Wheels Manufacturing Inc. Derailleur Hanger 339
$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913000-001 - Attaches to frame with (2) M4x8 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Problem Solvers 1-1/8-inch Headset Spacers
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Surly Thru Axle
$30.00
Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy
Problem Solvers Problem Solvers I-Spec EV Shifter / Dropper Remote Bar Clamp
$49.99
I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever. - Sold individually, the clamp can be mounted to the right or left side - Hinged clamp for easy installation without removing other components - Black Anodized, CNC AL-6061 Aluminum - Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes - 23g
Wheels Manufacturing Inc. Derailleur Hanger 390
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (2) M4x10 Flat Head Screw - Fasteners not Included - Replaces CEEPO Part # RD Hanger 2017-2018 Stinger Note: This hanger is for use with 135mm wide hubs. If using 130mm wide hubs, use DROPOUT-381. Compatibility: - CEEPO Stinger (with 135mm hub) - 2017-2018
Redshift Sports Extra Handlebar Clamps For Quick-Release Aerobars
$49.99
This extra set of clamps let you switch the Quick-Release Aerobars between multiple bikes in seconds. Details: - Attach or remove the aerobars in seconds, without using any tools - Patented clamping mechanism ensures repeatable, tool-free attachment of the Quick-Release Aerobars - Secondary safety slot prevents accidental release Note: the Quick-Release Aerobars include 1 set of handlebar clamps
Trek ABP Race Derailleur Hanger
$24.99
Get back on the trail with a quality replacement hanger. - Original equipment replacement rear derailleur hangers - Attachment hardware is sold separately Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
Trek MTB Low Direct Mount Front Derailleur Bracket
$20.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Front, Not applicable - Mounting location: Front - Attachment: 2-bolt
absoluteBLACK HOLLOWcage Oversized Derailleur Pulley Cage for Shimano 9100 / 8000
$699.00
The absoluteBLACK's HOLLOWcage® Oversized Derailleur Pulley Cage for Shimano 9100 / 8000 features a revolutionary mono-plate design to provide quiet and precise shifting. - Designed for use with Shimano Dura Ace 9100 / 9150 / 9170 , and Ultegra 8000 / 8050 - Fits up to a 32T cassette - The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise -Flexible cage design aligns better with the angle of the chain when using the higher gears of the cassette - HOLLOWcage uses abnormally large, bespoke, full ceramic bearings that make the pulleys incredibly stiff for greater shifting precision - Upper pulley features tall teeth to provide improved shifting precision
SRAM BB30 Spacer - 15.46mm
$3.00
BB30 Spacer - 15.46mm
SRAM Chainring Bolt Kit Red Quarq
$28.00
- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5
Cane Creek Hellbender Stainless Steel Cartridge Bearing
$24.00 - $52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Cane Creek Lt Elastomer
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Thudbuster LT Elastomer
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts.
Problem Solvers Standard Top Cap
$7.99 - $11.99
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.
Profile Design F-19 Replacement Pads
$25.00
Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro backing.
45NRTH Cobrafist Bar Donuts
$12.00
- Replacement bar donuts for cobrafist pogies
Wheels Manufacturing Inc. Derailleur Hanger 259
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Ghost #EZ1954 - (2) M4x8 Flat head screws included
Wheels Manufacturing Inc. Derailleur Hanger 275
$65.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Norco part #959375-16 - (1) M8-DROP192BOLT included Notes: - For use with direct mount Shimano XTR, XT or SLX rear derailleur. - If using direct mount Shimano Saint derailleur, use Wheels Mfg DROPOUT-276. - If using any non-direct mount rear derailleur use Wheels Mfg DROPOUT-202.
Wheels Manufacturing Inc. Derailleur Hanger 241
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 284
$32.00
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with Specialized SCS 135x12 thru-axle system. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included
RockShox Reverb Stealth Main Piston and Poppet Kit
$51.00 - $52.00
Main Piston and Poppet kit for A2 generation internally routed RockShox Reverb Stealth seatposts. - For "A2" designated posts, 2013-2016: Will not work for A1 posts - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle.
Problem Solvers Seatpost Shims
$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
Shimano Deore XT M8000 Outer Chainring Bolt Set of 4
$11.00
Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx
SRAM BB30 Spindle Spacer Kit for BB386
$20.00
Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken
SRAM Bottom Bracket Adaptor
$41.00
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
SRAM Flat Mount Disc Caliper Bracket Bolts
$6.00
Flat Mount Disc Caliper Bracket Bolts
Race Face Mud Crutch
$15.00
Mylar-laced woven elastic guard stretches around your fork to block mud/water as you ride.
Cane Creek Hellbender Headset Bearing
$24.00 - $52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Cane Creek VALT Spring
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
FSA Torx T-30 MTB Chainring Nut/Bolt Set
$22.00
This FSA MTB Chainring Nut/Bolt Set feature T-30 Torx sockets to resist stripping and ensure that you have reliably secure chainrings. - For MTB triple cranksets - Torx wrench included
FSA Torx T-30 Double Chainring Nut/Bolt Set
$19.99
This FSA Double Chainring Nut/Bolt Set feature T-30 Torx sockets to resist stripping and ensure that you have reliably secure chainrings. - Torx wrench included
Problem Solvers ReMatch Adapter 1.2
$34.99 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter. - Made from CNC Machined T6061 Aluminum - Anodized Black - Includes all necessary hardware for both I-Spec A and I-Spec B brake - No additional hardware needed
Wheels Manufacturing Inc. Derailleur Hanger 381
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (2) M4x10 Flat Head Screw - Fasteners not Included - Replaces CEEPO Part # Rd No. 3 Note: This hanger is for use with 130mm wide hubs. If using 135mm wide hubs, use DROPOUT-390. Compatibility: - CEEPO Mamba (with 130mm hub) - 2014-2018 - CEEPO Stinger (with 130mm hub) - 2014-2016
Wheels Manufacturing Inc. Derailleur Hanger 391
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (2) special M5x10 Flat head screws - Fasteners Not Included - Replaces Scott Part # 273417
Wheels Manufacturing Inc. Derailleur Hanger 403
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (2) M4x8 Flat Head Screw - Fasteners Included - Holes in hanger are threaded! - Replaces Cube Part #10106, 10107, 10131 (short road hanger with long slot)
Wheels Manufacturing Inc. Enduro 6806/29 (DUB Compatible) ABEC-3 Sealed Bearings, Bag of 2
$55.17
Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets. - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Imported - Sold as Bag of 2
KMC MissingLink 6-8-Speed 7.3mm
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
SRAM Level Ultimate/Tlm/Tl Lever Internals
$42.00
- Lever Internals Gen 2 Level Ultimate/TLM/TL Qty 1
Wolf Tooth Components Compression Plug w/Integrated Spacer Stem Cap
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
Race Face Aeffect R Dropper Bushing Midcap and Pin Kit
$20.00
RaceFace Aeffect R Dropper Post Small Parts.
RockShox DebonAir C1 Air Spring Upgrade Kit - Pike B1+/Revelation A1+
$45.00
- Air Spring Upgrade Kit—DebonAir C1 - Includes DebonAir C1 Assembly, seal head - PIKE B1+/Revelation A1+ (2018+)
Sprindex Sprindex
$140.00
- Allows easy, tool-free adjustment of spring rate - Includes spring, adjuster, and 5 performance adapters - Lightweight (highest grade steel allows less material) - See https://sprindex.com/pages/compatibility for fitment details
Problem Solvers Clamp-On Cable Guides
$14.99
The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.
Jagwire Brake or Shift Cable Tips
$4.49 - $44.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
Wheels Manufacturing Inc. Derailleur Hanger 9
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 64
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Page 1 of 14 Next page