Filter By:
Parts & Accessories

$149.99
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.

$56.00
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem
- Made in the USA
- Material: 6061 Aluminum
- Weight: 24g
- Outside Diameter: 26.0mm
- Stem Size: Threadless 1-1/8"

$39.99
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.

$39.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices.
- Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount
- Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series
- Material: aluminum / fiberglass composite
- Max load: 220g
- Weight: 40g (120mm) / 45g (150mm)
- Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

$36.99
A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights.
Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach!
- Communicates via ANT+ wireless technology
- Compatible with all Bontrager RT front and rear bike lights
- Can be paired with up to four lights simultaneously
- Wirelessly controls light functions, including on/off and mode selection, and signals battery status
- Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately)
- Double-press powers on all lights; single press changes modes
- Flashing LED when powered on indicates low battery in one or more connected lights
- Includes CR1632 battery, handlebar mount, and quick-start manual
- Battery: CR1632 (Coin)
- Weight: 12g

$34.99
Welcome to the future
The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights.
The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more.
- Transmitr remote can simultaneously control up to 7 lights
- ANT+ enabled for use with all Transmitr products
- Use Transmitr system for wireless on/off, mode selection, and more
- Can be used with multiple Flare RT lights for turn signal configuration
- Includes CR2032 battery, mount, and quick-start manual

$29.99
Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet.
- Compatible with: Urban, Vis, Solite, Taz, GoBe

$29.99
Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module.
- Compatible with Nip e-Bike Headlights

$29.99
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar.
- Compatible with Nip e-Bike headlights

$29.99
AC adapter for NiteRider Pro 2200 Race, Pro 1800 Race, Pro 1200 Race, MiNewt Pro 770 Enduro, MiNewt Pro 750, TriNewt, TriNewt Wireless and all MiNewt Series bike lighting systems.
Please note: Style and color may vary
SYSTEM COMPATIBILITY
- Pro 2200 Race
- Pro 1800 Race
- Pro 1400 Race
- Pro 1200 Race
- MiNewt Pro 770 Enduro
- MiNewt Pro 750
- TriNewt
- TriNewt Wireless
- MiNewt Series

$29.50
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame.
- 6061 Aluminum
- 30g
- 26.0mm outside diameter
- 5mm mounting bolt

$24.95
The strand of 23 LEDs keep a hammock, tent, or campsite lit at night.
- Twilights are not one, but a string of 23 LED lights to show the way
- Powered by 3 AAA batteries (Not included)
- Over 72 hours of burn time
- Includes carry case with Velcro closure
- Length: 120
- Weight: 4oz

$24.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position.
- Clamp: Fits 22-38 mm tubes (shims included)
- Crossbar: Device mount bar 25.4 mm
- Material: Engineering Grade Plastic and Steel
- Mount: Handlebar, Handlebar Stem
- Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded)
- Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open)
- Weight: 116 g / 4.08 oz

$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

$22.99
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote.
The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm.
- CNC alloy design provides light and stable mount
- Allows for infinite angle adjustment
- Compatible with 31.8mm - 22.2mm bars
- For use with Transmitr Wireless Remote

$21.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$19.99
Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

$19.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

$15.99
- Versatile LED and accessories forward mount
- Multiple mounting options
- Composite matrix construction with aluminum arms
- Bolts directly to stem faceplate
- Includes mounting hardware. (Stem mount, 2x mount arm, 2x length 30MM/35MM length to match most stems, spacers, screw set)
- Suitable for most Lezyne most E-Bike front light (Macro, Power, Power Pro, Micro, Hecto)

$15.00
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level.
- 32mm diameter clamping area for lights
- Attaches with two M5 bolts and a steel backing plate
- Mounts on left or right side

$14.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns.
System Compatibility:
- Lumina Series
- MiNewt Mini Series
- Mako Series

$14.99
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.

$12.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
- Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

$12.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$12.99
Vya redefines bike safety with smart, advanced features and an ultra-compact design. Extra seat post mounts allow Vya to be switched between bikes in seconds – perfect for families and multiple bike owners. This versatile mount can be used with the horizontal position of the Vya Pro Taillight or the vertically mounted Vya.
Features
- Innovative twist-lock system ensures Vya will lock into mount and not vibrate free
- Vya Pro Taillight mounts in a horizontal orientation; flip mount down for the standard vertical style of the Vya taillight
- Compatible with Vya Pro Taillight and standard Vya Taillight

$10.99
Key features:
- Replacement InnerGlo LED light strips for select Bontrager Town clothing
- Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants
- Sold individually

$10.99
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Page 1 of 2
Next page