Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Problem Solvers Cassette Spacer
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Shimano In-Line Brake Cable Adjuster
$18.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Problem Solvers Handlebar Clamp Shim
$10.00 - $13.85
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Sunlite Dog Leash
$29.99
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
Sunlite Chromoly Quill Stem Extender
$16.99 - $19.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Problem Solvers Compression Plug for 1 1/8-inch Forks
$21.99
The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.
Problem Solvers Cable Hanger Shim
$9.99
The Problem Solvers Cable Hanger Shim lets you install a 1 1/8-inch front brake-cable hanger on a 1-inch stem (hanger sold separately). This fine shim is made of light, durable anodized aluminum.
SRAM eTap BlipClamp
$14.99
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
RockShox Reverb Basic Service Kit (O-rings Only)
$14.99
RockShox Reverb Service Kit Includes O-Rings only
RockShox 2010-2012 Reverb Full Service Kit (includes new, upgraded IFP), A1
$65.99
Contains all the parts needed for scheduled maintenance and/or rebuild of Reverb and Reverb Stealth Seatposts. - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Requires RockShox Specialty Tools to perform service: Post Bleed Tool, Oil Height Tool, IFP Height Tool - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys and Bushing - Updated service kit as of 06/2016
RockShox Reverb Stealth Full Service Kit, A2 2013-2016
$65.99
RockShox Reverb Stealth Full Service Kit for A2 generation Reverb Stealth dropper seatposts - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - For "A2" designated posts, 2013-2016 Includes new Internal Floating Piston (IFP) - Requires RockShox Reverb Rebuild Tools: Post Bleed Tool, Oil Height Tool, IFP Height Tool - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - Updated service kit as of 06/2016
Origin8 Clamp-On Double Cable Stop
$8.79
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Origin8 Hydraulic Line Pass-Through Inserts
$4.59
Switching over to hydraulic brakes? Secure your cables with Origin-8's Hydraulic Pass-thru inserts. They will securely hold the hydraulic hose in place while you ride. • Fits bicycles with pass-thru braze-ons • Holds hydraulic hose securely in place • Bag of 10
Origin8 Double Chain Guide
$32.99
• Machined alloy arm • (ISCG Mount) international standard • Adjustable design • Sealed cartridge bearing • Prevents dropped chains on mountain bikes
Origin8 Single-Speed Conversion Kit
$59.99
• Converts a cassette hub to a single speed • 8 spacers included in various sizes to adjust chain line • Anodized 6061 aluminum • Fits Shimano/SRAM cassette bodies • Conical spacers for increased cog stiffness • Includes single-speed guide, spacers, as well as 18T & 16T cogs
Odyssey Slim Seat Clamp
$8.99
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
Odyssey Quartet Hub Guard
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
Odyssey GTX-S Gyro
$39.99
6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.
Campagnolo EPS Front Derailleur Stiffener
$82.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Campagnolo Chorus EPS V2 Power Unit
$365.00
The EPS Power Unit is the brain of the entire EPS system. The power unit input/output gate charges the battery and updates the firmware. The unit checks and manages the battery pack, interacts with the interface, drives the front and rear derailleurs, and displays system anomalies through an acoustic buzzer and RGD light. EPS V2 Power Units are for internal battery applications, under bottom bracket, or under chain stay mounting options and require the specific EPS V2 Interface. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1 meter for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F
RockShox Maxle Lite Through-Axle
$49.99 - $60.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
Wheels Manufacturing Inc. Derailleur Hanger 291
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M4x14 socket head screw included - Replaces Diamondback Part # 32-68-060
Wheels Manufacturing Inc. Derailleur Hanger 301
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 socket head screw included - Replaces Specialized Amazinger 2.0 (S16260002) and Amazinger 2.1 (S172600003) Hanger
Wheels Manufacturing Inc. Derailleur Hanger 288
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 281
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x10 Flat head screw included - For mechanical shifting systems
Wheels Manufacturing Inc. Derailleur Hanger 282
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x10 Flat head screw included - For Di2 shifting systems
Wheels Manufacturing Inc. Derailleur Hanger 285
$32.00
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with quick release rear hub. This is not a complete QR conversion kit. It is only a replacement hanger. For a replacement hanger when using the 135x12 SCS thru-axle wheel, use Wheels Mfg DROPOUT-284. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included
Wheels Manufacturing Inc. Derailleur Hanger 286
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M4x14 Flat head screw included
Wheels Manufacturing Inc. Derailleur Hanger 237
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M3x8 flat head screw included
Page 1 of 25 Next page