Tools/Maintenance

- The world's fastest race lube… period - Ultra-low coefficient of friction - Class-leading low wear on chain components - Provides the ultimate performance in both wet and damp or dry and dusty conditions - Continues to improve with chain run-in due to continued surface improvement at a molecular level - Non-wax based lubricant - Outperforms competitor chain lubes and waxes - Biodegradable and sustainable - Proprietary additives for self-lubricating capabilities - Synthetic polymers for long-distance performance - Works in temperatures down to -20°C - Low noise formulation - Pipette system for easy application

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

Dumonde Tech’s Classic Liquid Grease is a high-performance replacement for traditional viscosity grease. Liquid Grease reduces the coefficient of friction through Polymer Technology. Liquid Grease polymerizes and bonds to the surface providing extremely low drag. Liquid Grease is attracted to heat to provide lubrication at critical locations. Highly recommended for steel and ceramic cartridge bearing. Eliminates drag that grease-packed bearing experience for a drag-free bearing, even in the freezing temperatures. Ideal for suspension fork legs, full suspension pivots, wheel bearings, and roller bearing. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross.

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

Park Tool's Frame and Fork Straightener is a versatile and productive tool. Its open hook design enables it to straighten not only frames and forks, but also cranks and handlebars and it features vinyl coating on the hook and fulcrum pad to protect painted surfaces. The FFS-2's hook offers 8 inches of fore-aft adjustment and can fit a frame or fork tube of up to 1-3/4 inches in diameter.

3/8" drive Zyklop bit sockets. - 9-piece socket set on robust textile belt 3/8 - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - Long 3/8" socket for low-profile-fitting screw connections in tight construction spaces and for protruding threaded rods - Hexagonal profile enables precise and profile-preserving screwdriving with high power transmission - With Take-it-easy tool finder: color coding by size - 1x Belt B Deep 1 socket set, 3/8" drive, 9 pieces - 9x 8790 HMB Deep 3/8" socket: 8.0x64.0, 10.0x64.0, 12.0x64.0, 13.0x64.0, 15.0x64.0, 16.0x64.0, 17.0x64.0, 18.0x64.0, 19.0x64.0 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook-and-Loop Fastener Strips 30, 200 x 30 mm

The Ultimate Tire Lever. The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel. Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use Unique “thumb flange” makes it easy to apply pressure to the tire bead Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of particularly high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working. - With Rapidaptor technology for lightning-fast bit changes - Bitholders, magnetic, for easier application of the screw

Bicycle tool set in practical pouch with 89mm long bits. Includes 816 R Kraftform bit hand-holder with Rapidaptor quick-release chuck and multicomponent Kraftform handle for fatigue-free working. - Compact 13-piece screwdriving tool set for bicycle applications, also for mobile use - Practical range for DIY assembly work and repairs - Lightweight and robust folding pouch with 12x89mm long bits - Ergonomic Kraftform bit hand-holder with Rapidaptor quick-release chuck - Rapidaptor quick-release chuck allows rapid bit change

Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers, as well as tracking and shifting problems. The Frame and Fork End Alignment Gauge Set quickly determines whether the frame or fork dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. These Park gauges adjust to compensate for various hub widths from 100mm to 160mm, too.

A daily-use, shop version of Park Tool's world-famous CM-5.2 Chain Scrubber. The CM-25 features a super-tough die-cast aluminum case and handle, plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly. Park Tool's proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use. - Proven chain scrubbing technology leaves chains sparkling clean - Durable A380 aluminum die cast case and removable handle - Dual-sided sponges and wicking pads to help reduce drips - Rotating brushes clean on all four sides of every link - Brush and sponge cartridge quickly and easily clicks in and out (RBS-25) - Locking cover with stainless steel hinge pins - Choose drip or immersion fluid application methods - 100% serviceable

Wera torque screwdriver. Featuring unlimited torque to loosen seized screws, you can make simple adjustments of the required torque value without any special tools. Multi-component Kraftform handle with hard and soft zones for high working speeds, while being easy on the hands. Suitable for bits with 1/4" hexagon head drive. - Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck - Suitable for bits with 1/4" hex head drive - Easy-to-read scale value - Rapidaptor quick-release technology for rapid bit change - Audible click signal when pre-set value is reached - Numerical torque value indicator

Shock Bushing Press Kit An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes. - Fits 12mm and 1/2" bushings. - Machined aluminum - Anodized Red

Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection.

Zyklop ratchet has 72 fine-pitched teeth to ensure a low return angle of only 5 degrees. The ratchet head pivots freely and can be locked into any position by using the slide switch. With enhanced hand clearance, it works conveniently even in confined and difficult-to-access areas. The predefined locking positions at 0, 15 und 90 degrees, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0 position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving, and the rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand, preventing blisters and calluses. The softer anti-slip zones enable the low-loss transfer of high torque. - Combines 5 different types of ratchet into one tool - Flywheel design and easy-to-grip free-turning sleeve for high working speeds - Freely pivoting ratchet head, push-button release and left/right switchover - Fine-tooth design allows a small return angle of 5 degrees

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.

Developed for locking the nipple to the spoke during the wheel-building process, preventing the spoke-nipple connection from loosening. - Holds nipples in place but allows for up to 5 adjustments before compound breaks down - Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond - Developed in conjunction with Loctite - Includes two 10ml bottles

A complete tool set to work on both Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems (each sold separately). The CBP-8 includes a beefed-up bearing and crank puller and all the fittings necessary to remove and install both systems. - Bearing Puller That Fits Both Power Torque And Ultra-Torque - Crank Puller For Power Torque - Bearing Setter For Both Power Torque And Ultra-Torque - Removal Adaptor For Power Torque Crank Bearings - Removal Protection Pads For Use With Carbon Cranks - Removal Protection Adaptor For Use With Aluminum Crank Arms - Crank Removal Extension Plug For Power Torque

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades provides high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of particularly high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working. - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - Holding function (HF) securely holds the hexagon socket screw on the tool

• Use to remove air shaft and damper shaft • Reverse threaded • See RS1 Service Manual for instruction

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. - Kit includes 2 syringes, fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and DOT5.1 hydraulic fluid - For use with SRAM X0/ XX/ Guide/Level/Code/HydroR/G2 disc brakes - Compatible with DB-G2-R-A1, DB-G2-R-A2, DB-G2-RE-A2, DB-G2-RS-A1, DB-G2-RS-A2, DB-G2-RSC-A1, DB-G2-RSC-A2, DB-G2-ULT-A1, DB-G2-ULT-A2, DB-GDE-R-A1, DB-GDE-R-B1, DB-GDE-RE-A1, DB-GDE-RS-A1, DB-GDE-RS-B1, DB-GDE-RSC-A1, DB-GDE-RSC-B1, DB-GDE-T-A1, DB-GDE-ULT-A1, DB-LVL-A1, DB-LVL-T-A1, DB-LVL-TL-A1, DB-LVL-TLM-A1, DB-LVL-TLM-B1, DB-LVL-ULT-A1, DB-LVL-ULT-B1, DB-X0-B1, DB-XX-A2

Product details - A professional-grade tool developed in partnership with Knipex and made to last - 7.5"/190mm length provides high leverage with minimum effort - Made from heavy-duty steel and additional induction hardening for tough, continuous use - Made in Germany - Features an integrated class-leading crimper for cable end caps and housing ferrules

- Cut hydraulic disc brake hoses - Set connector insert to hoses - Adjustable hose clasping power - Compact size for easy storage - Spare blade included

- Premium syringes offer enhanced clarity, improved durability, and ergonomic handles. - Innovative quarter-turn valves make it easy to quickly open and close the bleed system. - Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician. - Includes bleed blocks for most popular 2-piston and 4-piston brake calipers. - Available separately for DOT fluid and mineral oil systems, each kit contains adapters for nearly all disc brake systems on the market. - Deluxe case keeps small parts organized and protected. -01: (Black Seal) : fit most DOT fluid brakes from Avid, SRAM, Formula, Hayes, and Hope -02: (Red Seal) : fit most mineral oil brakes from Shimano, Magura, Tektro, TRP, and Hayes

The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy to use, affordable and it works on nearly any bicycle spoke, no matter its diameter, material or shape.

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

Designed and built with the specific needs of the bike mechanic in mind. The RP-SET.2 includes five professional quality pliers for internal snap rings and one for external snap rings. Pliers are made from forged, heat treated cro-moly steel with a return spring and vinyl dipped grips. RP-1: .9mm straight internal. Opens from 22mm down to 0 (tips touching) RP-2: 1.3mm bent internal. Opens from 22mm down to 2mm (center to center) RP-3: 1.3mm bent external. Opens from 2mm (center to center) up to 18mm RP-4: 1.7mm bent internal. Opens from 21mm down to 2mm (center to center) RP-5: 1.7mm straight internal; Opens from 25mm down to 0 (tips touching)